BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//EURODYN//Schedule//DE
CALSCALE:GREGORIAN
METHOD:PUBLISH
BEGIN:VTIMEZONE
TZID:Europe/Berlin
X-LIC-LOCATION:Europe/Berlin
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:19700329T020000
RRULE:FREQ=YEARLY;BYMONTH=3;BYDAY=-1SU
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:19701025T030000
RRULE:FREQ=YEARLY;BYMONTH=10;BYDAY=-1SU
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
UID:317@eurodyn2026.org
DTSTAMP:20261026T144037Z
DTSTART;TZID=Europe/Berlin:20260930T150000
DTEND;TZID=Europe/Berlin:20260930T152000
SUMMARY:Onboard Optimization-Based Modal Identification for Indirect Brid
 ge Monitoring
LOCATION:Room A310
DESCRIPTION:MS 15\n\nPresenter: Stoura\, Charikleia\n\nAuthors: Stoura\, 
 Charikleia\; Chatzi\, Eleni\n\nChair: De Roeck\, Guido\n\nAbstract: Indi
 rect monitoring of railway bridges using onboard measurements from trave
 rsing vehicles has emerged as a promising and cost-effective alternative
  to conventional structural health monitoring. This approach allows the 
 assessment of numerous bridges using only a limited number of roving sen
 sors and leverages continuously available data from in-service trains. O
 ver the years\, many methods have been developed\, with early approaches
  relying on simple Fourier transform analyses or frequency domain decomp
 osition of vehicle-acquired data to estimate the bridge’s natural freque
 ncies. As an advancement\, later studies adopted subspace identification
  techniques that additionally separate the vehicle dynamics from those o
 f the bridge and use the residual response between two vehicle passages 
 to suppress the influence of track roughness. These approaches have show
 n great potential for accurately identifying bridge frequencies\, yet th
 eir performance remains dependent on signal length and algorithmic param
 eters\, i.e.\, model order and Hankel matrix dimensions\, leading to bia
 sed or unstable estimates of the bridge’s dynamic properties. Furthermor
 e\, these methods cannot determine damping ratios and often rely on assu
 med bridge mode shapes\, preventing direct estimation of modal character
 istics. The present study seeks to enhance the accuracy of such indirect
  identification approaches through an optimization-based refinement sche
 me. This scheme minimizes the discrepancy between the measured bridge re
 sponse and that reconstructed from the identified modal parameters. In d
 oing so\, it simultaneously estimates the corresponding damping ratios a
 nd mode shapes—quantities that conventional indirect approaches fail to 
 capture. The proposed methodology addresses critical limitations in indi
 rect bridge monitoring by refining frequency estimates\, extending modal
  identification capabilities\, and enabling reliable inference of bridge
  dynamics even when only partial prior information is available.
URL:https://eurodyn2026.org/submission/317
END:VEVENT
END:VCALENDAR