BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//EURODYN//Schedule//DE
CALSCALE:GREGORIAN
METHOD:PUBLISH
BEGIN:VTIMEZONE
TZID:Europe/Berlin
X-LIC-LOCATION:Europe/Berlin
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:19700329T020000
RRULE:FREQ=YEARLY;BYMONTH=3;BYDAY=-1SU
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:19701025T030000
RRULE:FREQ=YEARLY;BYMONTH=10;BYDAY=-1SU
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
UID:124@eurodyn2026.org
DTSTAMP:20261026T144037Z
DTSTART;TZID=Europe/Berlin:20260928T163000
DTEND;TZID=Europe/Berlin:20260928T165000
SUMMARY:Comparison of natural frequencies and strain-based influence line
 s as damage indicators for structural health monitoring of railway bridg
 es
LOCATION:Room F102
DESCRIPTION:MS 14\n\nPresenter: Maes\, Kristof\n\nAuthors: Maes\, Kristof
 \; Verbist\, Karolien\; Hendrickx\, Rafael\; Berten\, Karlien\; Reynders
 \, Edwin\; Lombaert\, Geert\n\nChair: Cunha\, Álvaro\n\nAbstract: Struct
 ural health monitoring (SHM) of civil engineering structures relies on t
 he recording and evaluation of the structural response\, either on a per
 manent or a periodic basis. The assessment of the structural health most
 ly involves the derivation of  so-called damage indicators from the raw 
 response data. In vibration-based SHM\, those typically consist of the n
 atural frequencies and displacement or strain mode shapes. Recent work h
 as also considered the use of strain-based unit influence lines as alter
 native damage indicators in the particular case of railway bridges. Whil
 e natural frequencies are determined by the global stiffness distributio
 n of the structure\, the influence lines of quantities of interest such 
 as strains or internal forces are more sensitive to local stiffness. In 
 this way\, a change in influence lines also reveals a change in internal
  force distribution\, which is of particular interest when it comes to t
 he assessment of the structural health. This paper compares the use of n
 atural frequencies and strain-based influence lines for a case study on 
 a Vierendeel railway bridge in Mechelen\, Belgium. The natural frequenci
 es are derived from acceleration measurements on the bridge deck\, using
  operational modal analysis (OMA). The influence lines are extracted fro
 m the dynamic strain response of the bridge during train passages\, usin
 g an estimate of the axle loads and locations\, derived from simultaneou
 s strain measurements on the rails. In this study\, both indicators are 
 compared (1) in terms of their variation under environmental and operati
 onal variability and (2) in terms of their sensitivity to local damage\,
  which is modeled using a detailed finite element model of the railway b
 ridge.
URL:https://eurodyn2026.org/submission/124
END:VEVENT
END:VCALENDAR